Japanese
THERVEK G
Refractory castables Light weight
insulating castables

THERVEK G

Dry gunning

Dry gunning material with excellent gunning performance and versatility.

  • Offers excellent adhesion with minimal rebound loss.
  • Using a gunning machine such as a Need Gun, the dry powder is conveyed by compressed air and mixed with water at the nozzle before being applied to the furnace wall.
  • Dry gunning requires no formwork or premixing, providing significantly higher installation efficiency than casting.

Main applications

  • Various industrial kilns and furnaces
  • Incinerator combustion chambers
Selected Products

Refractory castables Dry gunning materials - THERVEK G

  • G-40（1800℃）
  • G-901（1700℃）
  • G-TPMIX（1600℃）
  • G-27S（1450℃）
  • G-HYMIX（1350℃）

Light weight Insulating castables Dry gunning materials - THERVEK G

  • G-LC26（1400℃）
  • G-LC22（1200℃）
  • G-LC20S（1100℃）
  • C-VRL-H（1000℃）

Key Features of the THERVEK™ G Series

Refractory gunning materials
  • Dry gunning castable refractory material with superior gunning performance (superior adhesion and low rebound loss).
  • Significantly increases installation efficiency in comparison with casting, since no forms or mixing are required.
  • Offers an extensive lineup of products with maximum service temperatures ranging between 1300℃ and 1800℃, and can be used for all manner of equipment.
Gunning light weight insulating materials
  • Dry gunning insulating castable material with superior gunning performance (superior adhesion and low rebound loss).
  • Significantly increases installation efficiency in comparison with casting, since no forms or mixing are required.
  • Offers an extensive lineup of products with thermal conductivity ranging between 0.2W/m·K and 0.5W/m·K, and can cater to all manner of energy-saving requirements.